HiModel
EZRUN-18A BRUSHLESS ESC FOR 1/18 CAR (SPORTFUL RACE) V2
| ● Output | Continuous current 18A, burst current 50A. |
| ● Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. |
| ● BEC Output | 6V/1A. |
| ● Resistance | 0.01 Ohm. |
| ● Motor Supported | Sensorless Brushless Motor |
| ● Suitable Brushless Motor | 12T and > 12T |
| ● Suitable Car | 1/18 on-road or off-road cars / trucks for normal race or sportful race. |
| ● Size | 31.5mm(L) * 24mm(W) * 15mm(H). |
| ● Weight | 19g(Without wires) |
, , , , , , Specifications:, , , , , , , , , , , Specification:, Programmable Items, , ,
Features: Features: ● Compatible with all sonsorless brushless motor. ● ...HiModel
EZRUN-25A BRUSHLESS ESC FOR 1/10 CAR W/REVERSE (SPORTFUL RACE)25A-L V2
| ● Output | Continuous current 25A, burst current 90A. |
| ● Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. *Note1 |
| ● BEC Output | 6V/1.5A. |
| ● Resistance | 0.0015 Ohm. |
| ● Motor Supported | Sensorless Brushless Motor |
| ● Suitable Brushless Motor | 9T and > 9T |
| ● Suitable Car | 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race. |
| ● Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| ● Weight | 30g(Without wires) |
| For 4-6 Cell Ni-xx | You needn't change the fan coming with the ESC; |
, , , , , , Specifications:, , , , , , , , , , , Specification:, *Note1:, For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);, Programmable Items, , ,
Features: Features: ● Compatible with all sonsorless brushless motor. ● ...HiModel
EZRUN-35A BRUSHLESS ESC FOR 1/10 CAR W/REVERSE (SPORTFUL RACE) V2
| ●Output | Continuous current 25A, burst current 90A. |
| ●Input | 4-9 cells NiMh/NiCd or 2-3 cells LiPo. *Note1 |
| ●BEC Output | 6V/1.5A. |
| ●Resistance | 0.0015 Ohm. |
| ●Motor Supported | Sensorless Brushless Motor |
| ●Suitable Brushless Motor | 9T and > 9T |
| ●Suitable Car | 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race. |
| ●Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| ●Weight | 30g(Without wires) |
| For 4-6 Cell Ni-xx | You needn't change the fan coming with the ESC; |
, , , , , , Specifications:, , , , , , , , , , , Specification:, *Note1:, For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);, Programmable Items, , ,
Features: Features: ●Compatible with all sonsorless brushless motor. ●Use top ...3 Reviews
HiModel
EZRUN-CRAWLER-35A-SL 35A BRUSHLESS ESC FOR ROCK CRAWLER V2
| BEC Output | 6V/1.5A. |
| Resistance | 0.0015 Ohm |
| Suitable Brushless Motor | >=32T |
| Suitable Car | Rock Crawler |
| Weight | 30g(Without wires). |
| ● For 4-6 cells NiMH or 2S Lipo | You needn’t change the cooling fan coming with the ESC; |
| Includes | 1 x ESC |
Features:, , Output:, Continuous current 35A, burst current 190A., Input:, 4-9 cells NiMH/NiCd or 2-3 cells LiPo., Motor Supported:, Sensorless Brushless motor., Size:, 31.5mm(L) * 27.5mm(W) * 24mm(H)., Note1:, , ● For 7-9 cells NiMH or 3S Lipo: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);, Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection., 3.7 Motor uses top quality materials:, Aluminium shell (case), Includes/Requires:, ,
This ESC is specially designed for ROCK CRAWLER. 1 Specification ...HiModel
HOBBYWING 40A / 60A 2-6S ELECTRIC BRUSHLESS SPEED CONTROLLER (ESC) TYPE PLATINUM-40A
, , , , , , Specifications:, , , , , , , , , , , Platinum Series, , Normal Voltage ESC（Supports 2 to 6 Cells Lipo), , , , , , , , , , , , , , , , Class, , Model, , Cont., Current, , Burst, Current, , BEC, Mode, , BEC, Output, , User, Programmable, , Battery Cells, , Weight, , Size, , Lipo, , NiMH, , L*W*H, , 40A, , Platinum-40A, , 40A, , 60A, , Switch, , 5.25V or 6V, 3A, , Yes, , 2-6, , 5-18, , 38g, , 59*27*12, , 60A, , Platinum-60A, , 60A, , 90A, , Switch, , 5.25V or 6V, 3A, , Yes, , 2-6, , 5-18, , 68g, , 70*34*16, , 80A, , Platinum-80A, , 80A, , 120A, , Swicth, , 5.25V or 6V, 3A, , Yes, , 2-6, , 5-18, , 77g, , 70*34*16, , 100A, , Platinum-100A, , 100A, , 150A, , Switch, , 5.25V or 6V, 3A, , Yes, , 2-6, , 5-18, , 82g, , 70*34*16, , 150A, , Platinum-150A-OPTO, , 150A, , 220A, , None, , None, , Yes, , 2-6, , 5-18, , 125g, , 88*55*15, , High Voltage ESC（Supports 5 to 12 Cells Lipo), , , , , , , , , , , , , , , , 50A, , Platinum-50A-HV, , 50A, , 75A, , None, , None, , Yes, , 5-12, , 15-36, , 68g, , 70*34*16, , 70A, , Platinum-70A-HV, , 70A, , 105A, , None, , None, , Yes, , 5-12, , 15-36, , 82g, , 70*34*16, , 100A, , Platinum-100A-HV, , 100A, , 150A, , None, , None, , Yes, , 5-12, , 15-36, , 123g, , 88*55*15, , 120A, , Platinum-120A-HV, , 120A, , 180A, , None, , None, , Yes, , 5-12, , 15-36, , 125g, , 88*55*15, , , ,
Features: ► High performance microprocessor brings out the best compatibility ...4 Reviews
HiModel
LOTUSRC T380S QUADCOPTER ARTF (FPV CARRIER)
, , , , , , Specifications:, , , , , , , , , , , Technical parameters, Aircraft size, , 410x410x140, , Mm, , Maximum expandable size, , 615x615x140, , Mm, , Motor to motor, , Diagonal distance between two motor centers, , 410mm, , Propellers, , frontal and versa professional props 8045, , 8inch, , Battery (Not included), , LiPo 3S 2200mAh 20C, , standard1P, , Aircraft weight(kit only), , Without battery, receiver, applicable payload, , 430gram, , Take-off weight, , 3S 2200mAh 1P battery, receiver, , 610gram, , Recommended payload, , Camera and mount, , ≤380gram, , Maximum payload, , Use standard 1P battery, , ≤380gram, , Maximum takeoff weight, , Use standard 1P battery, , 1300gram, , Flight distance, , Visual area, , -, , Flight time, , 3S 2200mAh 1Pbattery, receiver, , 18~25mins, , Wind resistance, , ≤4, , Class, , , ,
Features: THIS IS THE NEW VERSION T380S. Function and features ...7 Reviews
HiModel
FY-91Q MULTI-ROTOR FLIGHT STABILIZATION & AUTOPILOT SYSTEM
, , , , , , Specifications:, , , , , , , , , , , FY-91Q Module, Operating voltage ：4.0~6.0 Volt, Current consumption ：50mA (5V input), Dimensions ：55 x 33 x 20 mm, Weight (not including wires) ：20g, Operating Temperature ：-25°C~ +70°C, The maximum allowable rotation rate ： 3 rotations per minute, APPLICABLE AIRCRAFTMODELS, The FY91Q can be installed and flown it the following multi-rotor aircraft:, - 4 motored quadcopters;, - Tri-axial rotory aircraft with 6 motors, - Six-axial multi-rotor aircraft (6 motors), REMOTE CONTROL SYSTEM COMPATIBILITY, FY-91Q have been tested to work with the following RC systems:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, · Graupner/JR PPM 8, PPM 12, SPCM mode；, · MPX PPM8, PPM 12 with UNI mode, · Any remote control system using the standard of 1.5 ms neutral position., , ,
Features: THIS IS FY91Q MODULE ONLY, THE GPS & COMPASS ...HiModel
HIMODEL 40.915 MHZ CHANNEL 87 FM FUTABA CRYSTAL(SET)
| Model | HC-50U (standard) |
| Frequency tolerance (at 25?) | �3PPM to �5PPM |
| Working Temperature | -20? to +70? |
, , , , , , Specifications:, , , , , , , , , , , Compatible with nearly all Futaba transmitters and other Futaba compatible transmitters using standard size crystals., single frequency conversion crystal., , ,
Features: Model:HC-50/U Technical Parameter:+/-10PPM Working Temperature:-20c~+70c single frequency conversion crystal. ...HiModel
HIMODEL 40.865 MHZ CHANNEL 84 FM FUTABA CRYSTAL(SET)
| Model | HC-50U (standard) |
| Frequency tolerance (at 25?) | �3PPM to �5PPM |
| Working Temperature | -20? to +70? |
, , , , , , Specifications:, , , , , , , , , , , Compatible with nearly all Futaba transmitters and other Futaba compatible transmitters using standard size crystals., single frequency conversion crystal., , ,
Features: Model:HC-50/U Technical Parameter:+/-10PPM Working Temperature:-20c~+70c single frequency conversion crystal. ...HiModel
DRAGONFLY 36# BELT TRANSMISSION 3D BRUSHLESS HELICOPTER RTF 72MHZ
| Main rotor diameter | 630mm |
| Tail blades diameter | 145mm |
| Length | 580mm |
| Height | 195mm |
| Weight | 600g (Inc. battery) |
| Motor | 180 brushless motor |
| Battery | Lipoly 1500mah/11.1V |
| Size of battery | 10.3*3.3*2cm |
| Weight of battery | 132g |
| Speed Control | 25A |
| Band | 72Mhz |
| Radio stick mode | mode 1 & mode 2 optional, mode 2 (throttle on left stick) will be sent by default. |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: This is the latest release of Walkera company, the ...HiModel
HIMODEL 40.975 MHZ CHANNEL 91 FM FUTABA CRYSTAL(SET)
| Model | HC-50U (standard) |
| Frequency tolerance (at 25?) | �3PPM to �5PPM |
| Working Temperature | -20? to +70? |
, , , , , , Specifications:, , , , , , , , , , , Compatible with nearly all Futaba transmitters and other Futaba compatible transmitters using standard size crystals., single frequency conversion crystal., , ,
Features: Model:HC-50/U Technical Parameter:+/-10PPM Working Temperature:-20c~+70c single frequency conversion crystal. ...HiModel
HIMODEL 40.985 MHZ CHANNEL 92 FM FUTABA CRYSTAL(SET)
| Model | HC-50U (standard) |
| Frequency tolerance (at 25?) | �3PPM to �5PPM |
| Working Temperature | -20? to +70? |
, , , , , , Specifications:, , , , , , , , , , , Compatible with nearly all Futaba transmitters and other Futaba compatible transmitters using standard size crystals., single frequency conversion crystal., , ,
Features: Model:HC-50/U Technical Parameter:+/-10PPM Working Temperature:-20c~+70c single frequency conversion crystal. ...HiModel
HIMODEL 40.830 MHZ CHANNEL 83 FM FUTABA COMPATIBLE TRANSMITTER CRYSTAL
| Model | HC-50U (standard) |
| Frequency tolerance (at 25?) | �3PPM to �5PPM |
| Working Temperature | -20? to +70? |
, , , , , , Specifications:, , , , , , , , , , , Compatible with nearly all Futaba transmitters and other Futaba compatible transmitters using standard size crystals., single frequency conversion crystal., , ,
Features: Model:HC-50/U Technical Parameter:+/-10PPM Working Temperature:-20c~+70c single frequency conversion crystal. ...HiModel
DRAGONFLY 36# BELT TRANSMISSION 3D BRUSHLESS HELICOPTER RTF 35MHZ
| Main rotor diameter | 630mm |
| Tail blades diameter | 145mm |
| Length | 580mm |
| Height | 195mm |
| Weight | 600g (Inc. battery) |
| Motor | 180 brushless motor |
| Battery | Lipoly 1500mah/11.1V |
| Size of battery | 10.3*3.3*2cm |
| Weight of battery | 132g |
| Speed Control | 25A |
| Band | 35Mhz |
| Radio stick mode | mode 1 & mode 2 optional, mode 2 (throttle on left stick) will be sent by default. |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: This is the latest release of Walkera company, the ...HiModel
CUPID II ELECTRIC HELICOPTER RTF(HM-1003)
| Model No. | HM-1003 |
| Model Name | Cupid II |
| Main rotor diameter | 530mm |
| Fuselage length | 500mm |
| Weight | 280-300g |
| Radio Controller | 4 Channel FM |
| Frequency | 35Mhz (only 35Mhz available currently) |
| Servo | 2*9g |
, , , , , , Specifications:, , , , , , , , , , , Battery;8.4V Ni-Mh, , ,
Features: The fuselage widely using carbon fiber and nylon, making ...